Portable Percussion Drilling Rig Machine and Blast Hole Drilling Csxt-70

• Customization: Available
• After-sales Service: Supplied
• Warranty: Supplied
• Model NO.: CSXT-70
• Certification: ISO 9001:2000
• Condition: New
• Motor: AC Motor
• Drill Hole Diameter: <100mm
• Drill Hole Depth: <100m
• Bit Type: Button Bits
• Drilling Way: Impactor
• Transport Package: Wooden Box
• Specification: 1740*260*420mm
• Trademark: Xingtan
• Origin: China
• HS Code: 8430696910
• Production Capacity: 10000PCS

Product Description

CSXT-70 pneumatic DTH drilling rig isan efficient rock drilling designed for these highway, railway, water conservancy, mine construction engineers which road inconvenient in the earlier projects stage.  The auxiliary equipment for supplying power is lighter and easier to relocation and transfer. In the case of utmost reduce the host weight can still meet the needs of the digging large diameter and deep hole operations. But also is suitable for the slope support and other projects. So the machine is a kind of portable and economic models. 

Technical Parameter:

Model	CSXT-70
Bore diameter	φ50-90mm
Rock hardness	≤20
Bore depth	≤15m
Power head rotation speed	110r/min
Working air pressure	0.5-0.7Mpa
Air consumption	≥6m3/min
Feeding air cylinder
Cylinder diameter	90mm
Propulsion stroke	1070mm
Max. feeding force	3600N
Pneumatic motor
Model	TMY3
Power	3kW
Rated rotation speed	3200r/min
Drill rod
OD of drill rod	φ42mm
Length of drill rod	1025mm
Main machine overall size	1740×260×420mm
Weight:	280kg

Other Type of Drill Rig:

Model	CSXT- 70	CSXT-100	CSXT-100	CSXT-100-4
				CSXT-120-5.5
Drilling diameter (mm)	50-90	90-130	90-130	90-130
Rock ruggedness coefficient	>20	>20	>20	>20
Drilling depth (m)	15	25	25	30-40
Rotate speed (r/min)	110	110	110	110
Working air pressure (Mpa)	0.5-0.7	0.5-1.0	0.5-1.0	0.5-1.0
Air comsumption (m3/min)	6	6	12	10
Cylinder diameter (mm)	90	140	140	140
Max propelled force ( N)	3600	9600	9600	9600
Electric motor power (kw)	3	4	-----	4/5.5
Electric Motor Voltage( V)	380	380	-----	380
Rated speed (r/min)	1440	1440	3200	1440
Drilling rod (mm)	42	50/60	50/60	60
Drilling rod length (mm)	1025	1025	1025	1025
Dimension (mm)	1740*260*420	2280*440*550	2230*380*550	2230*380*550
Weight (kg)	280	470	450	460/480

 

1. Scope of application: Type 70 pneumatic down-the-hole drilling rig is a new type of high-efficiency rock drilling equipment designed by our factory for water conservancy projects and building materials sites. It is widely used in rock formations of open pit mines, water conservancy projects and construction projects. Large-diameter deep hole, which combines the advantages of various small-scale down-the-hole drilling rigs at home and abroad, is an ideal equipment that is light in weight, convenient in transportation and movement, simple in operation, and popular among users.

 

2. Features:

(1) Applicable type of down-hole impact with high rock drilling efficiency.

(2) With compressed air as the power source, the power is single, safe and reliable.

(3)Simple structure, easy to use, short auxiliary time and light weight

 

3. Working principle

The rig is a machine that uses compressed air as the power to convert compressed air power into mechanical force to break the rock. The rig is equipped with an impactor and a bit. During the working process, the piston of the impactor continuously impacts the tail. The alloy teeth on the bit continually impact the rock, and the rotating torque generated by the reducer causes the drilling tool to rotate and propel the axial force generated by the cylinder. Drill holes into the drill.

 

4. Structural characteristics

The 70 type down-the-hole drilling rig is composed of a dynamic bearing mechanism, a speed reducer, a pneumatic motor, a propulsion cylinder, an impactor, an oil mister and a pneumatic control valve.

 

5. The operating procedures

(1) Transportation preparation work

(1) After the drilling rig is transported to the construction site, inspect the components and whether the parts are defective or not, and then assemble and refuel.

(2) First, the two front legs of the carriage are located at the working position, and the support rod is adjusted to determine the angle of the carriage.

(3) Before connecting the motor and the hose, the hose should be carefully cleaned. The pipeline valve can be opened for a few seconds, and the foreign matter in the hose is blown off with compressed air.

(4) Check whether the bolts are tightly connected, whether the pipelines are firmly connected, and there is no leakage or oil leakage.

(5) Install an appropriate amount of 30# oil in the oil mister.

(6) The handles of the pneumatic control valve are all placed in the "stop" position. After the preparation is completed, the no-load test can be carried out.

 

6. Work procedures

(1) opening

Raise the reducer to the upper limit position, tighten the drill rod, and then turn on the air motor. After the normal load is normal, slowly open the engine to advance the cylinder, place the drill head on the working surface, close the propulsion cylinder, and then open the impactor and drill. Progress. When the drill head is drilled to about 100 mm, the drill will always maintain a certain propulsive force. Pay attention to observe whether the oil mister supplies oil and adjust the oil supply.

(2) Install rod

After drilling the first drill pipe, stop the movement of the air motor, close the impactor to stop feeding, set the reducer to the lower limit position, fix the drill pipe in the clamp with a fork, reverse the reducer, and make the drill The rod is disengaged from the joint on the reducer. Then raise the reducer to the upper limit position and insert it into the second drill pipe. After the connection is secure, the drilling operation can be performed.

(3) Unloading rod

When the drill pipe is drilled into contact with the loader, the rotation is stopped, and a special round bar is inserted into the hole on the outer side of the unloader, and the unloader is rotated to make the second flat groove at the end of the drill pipe be aligned. The rectangular groove of the device, inserting the fork, reversing the motor, disengaging the joint on the reducer from the drill pipe, and adjusting the first flat groove on the tail end of the drill pipe to the rectangular groove of the forward unloader, inserting Another fork, then remove the fork in the card holder and let the unloader and the other fork drive the drill rod back. (The motor can be moved slowly and can not be reversed.) When the second flat groove at the end of the next drill pipe is aligned with the rectangular groove of the fastener, insert the fork and reverse the motor to make the upper and lower drill pipes After the coupling thread is disengaged, take the upper drill rod, slowly lower the reducer, and align the rectangular groove of the unloader to the first flat groove at the end of the next drill pipe, and then repeat the above actions, in turn Remove the drill pipe.

 

7. Operational precautions

(1) The operator must be trained and familiar with the operation method before operating independently.

(2) The operating valve must be placed in the "stop" position before the compressed air (ie, air supply) is turned on.

(3) The rig must be supported firmly before starting work to prevent the rig from falling to the ground.

(4) During the feeding process, it is strictly forbidden to open and push the cylinder suddenly and quickly to avoid jacking up the rig
and causing an accident.

(5) Always check the lubrication of the air motor.

(6) Always check the connection of each pipe, nut, joint, etc. at any time.

(7) Reverse rotation is not allowed during drilling to avoid tripping of the drill pipe.

(8) During the operation of the drilling rig, it should be noted that the sound andmechanical movement of the impactor are normal.
If abnormal phenomena are found,the machine should be stopped immediately for inspection.

(9) When adding the drill pipe, pay special attention to the cleaning inside the hole toavoid the damage caused by the sand mixed
into the internal damage.